Payment & Shipping Terms:
|Name:||Electric Glass Switchable Privacy Glass||Thickness:||5+5mm / 6+6mm|
|Color:||Clear, Milky, Grey, Blue, Green, Red, Black||Common Width:||1.0, 1.2, 1.5, 1.8meters|
|PDLC Film Length:||30 Or 50 Meters||Response Time:||<=50ms|
LCD Electric Glass Switchable Privacy Glass / Intelligent Glass Film
Glass Switchable Privacy Glass Description
Smart switchable film is a product that is capable of adjusting light transmission between transparent and opaque using AC power. Due to moisture sensitivity, earlier versions of the film were used only to make smart glass by lamination on glass. With continual improvement in moisture resistance, the new (3rd) generation of the film can be directly installed on existing windows with special glue or self-adhesive. It combines many functions, such as light adjustment, UV and infrared blocking, advertising and security.
Glass Switchable Privacy Glass Features
(1). Privacy Protection:
Transparent (Power on), Opaque but light pervious (Powder off) in high switching speed. It’s instantaneous to make the film from completely transparent to fully opaque or vice versa.
(2). Energy Saving:
In an energized state, only 5W low power consumption per square meter per hour. 60% infrared can be shield by smart film to reduce heat radiation and transfer; 99% of UV can be shield to protect interior furnishings from color-fading or aging, to protect personnel from diseases caused by ultraviolet radiation.
(3). Sound Proofing:
Smart film having a sound damping effect; can effectively block all kinds of noise.
(4). Diversified Control:
Smart glass is versatile and can be controlled in many ways, like a wall switch, dimmer, motion detector, light, temperature sensor, remote or remote network control.
Glass Switchable Privacy Glass Description:
|Product Name||LCD Electric Glass Switchable Privacy Glass / Intelligent Glass Film|
|Raw Material Glass||Clear Glass, Ultra Clear Glass|
|Thickness||5+5mm / 6+6mm|
|Color||Clear, Milky, Grey, Blue, Green, Red, Black|
Smart Glass -- 1.0, 1.2, 1.5, 1.8meters (Max 1.8meters)
Self-Adhesive PDLC Film-- 1.0, 1.2, 1.5meters (Max 1.5meters)
|PDLC Film Length||30 or 50 meters/roll or per request|
Clear Glass: >= 82% (ON) / <=8% (OFF)
Ultra Clear Glass: >= 86% (ON) / <=10% (OFF)
From OFF to ON: <=50ms
From ON to OFF: <=200ms
|Operating Temperature||-20 ℃ and 70 ℃|
|Transformer||AC 60V (Suggest to use nominated transformer)|
|Silicon Glue||Neutral (Suggest to use nominated silicon glue to prevent glass corrison)|
During the change of the polymer from a liquid to solid, the liquid crystals become incompatible with the solid polymer and form droplets throughout the solid polymer.
The curing conditions affect the size of the droplets that in turn affect the final operating properties of the "smart window".
Typically, the liquid mix of polymer and liquid crystals is placed between two layers of glass or plastic that include a thin layer of a transparent, conductive material followed by curing of the polymer, thereby forming the basic sandwich structure of the smart window. This structure is in effect a capacitor.
Electrodes from a power supply are attached to the transparent electrodes.
With no applied voltage, the liquid crystals are randomly arranged in the droplets, resulting in scattering of light as it passes through the smart window assembly. This results in the translucent, "milky white" appearance.
When a voltage is applied to the electrodes, the electric field formed between the two transparent electrodes on the glass causes the liquid crystals to align, allowing light to pass through the droplets with very little scattering and resulting in a transparent state. The degree of transparency can be controlled by the applied voltage. This is possible because at lower voltages, only a few of the liquid crystals align completely in the electric field, so only a small portion of the light passes through while most of the light is scattered. As the voltage is increased, fewer liquid crystals remain out of alignment, resulting in less light being scattered. It is also possible to control the amount of light and heat passing through, when tints and special inner layers are used.
Smart Glass is such a versatile solution. It can be used in partition screens, windows, roof-lights and doors, security & teller screens and even serve as an excellent HD projection screen. Such is the beauty and flexibility of the product, architects and designers continue to find new and innovative uses for it.
Switchable privacy glass products can be used in residential and commercial buildings alike. As architects and designers explore the boundaries of switchable privacy glass and turn conventional perspectives of glass on their head, it is expected that the market will continue to grow and expand into new and innovative uses of privacy glass.
How does switchable privacy glass work?
Through the application of an electrical current the properties of the glass change turning it from opaque to clear in less than 0.01 seconds. This transformation to opaque and back again can be triggered from a range of wall switches, remote controls, movement sensors, light sensors or timers, depending on each customer’s individual needs. Numerous variations of privacy switchable glass can be supplied including colour tinted, fire rated, double glazed, curved and shaped privacy glass.
The original ON/OFF switchable smart glass is a laminated glass panel with a polymer dispersed liquid crystal interlayer film (PDLC). It offers instant privacy at the flick of a switch by changing its state from transparent to opaque and vice versa through a small electrical current.
Once activated, Electric Glass turns transparent for as long as the transformer is running. When the electrical current stops, the electric smart glass instantly returns to an opaque state.
Contact Person: Mark Yang